View STD11NM60ND_4489798.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STD11NM60ND, STF/I11NM60ND STP11NM60ND, STU11NM60ND
N-channel 600V - 0.37 - 10A - FDmeshTM II Power MOSFET I2PAK, TO-220, TO-220FP, IPAK, DPAK
Features
Type STD11NM60ND STF11NM60ND STI11NM60ND STP11NM60ND STU11NM60ND VDSS (@Tjmax) RDS(on) max 650 V 650 V 650 V 650 V 650 V < 0.45 < 0.45 < 0.45 < 0.45 < 0.45 ID 10 A 10 A(1) 10 A 10 A 10 A
3 1
3 12
DPAK
3 2 1
IPAK
IPAK
3 1 2
1 2 3
1. Limited only by maximum temperature allowed
The worldwide best RDS(on)* area amongst the fast recovery diode devices 100% avalanche tested Low input capacitance and gate charge Low gate input resistance Extremely high dv/dt and avalanche capabilities
TO-220
TO-220FP
Figure 1.
Internal schematic diagram
Application
Switching applications
Description
The FDmeshTM II series belongs to the second generation of MDmeshTM technology. This revolutionary Power MOSFET associates a new vertical structure to the company's strip layout and associates all advantages of reduced onresistance and fast switching with an intrinsic fastrecovery body diode.It is therefore strongly recommended for bridge topologies, in particular ZVS phase-shift converters. Table 1. Device summary
Marking 11NM60ND 11NM60ND 11NM60ND 11NM60ND 11NM60ND Rev 1 Package DPAK TO-220FP I
2PAK
Order codes STD11NM60ND STF11NM60ND STI11NM60ND STP11NM60ND STU11NM60ND April 2008
Packaging Tape and reel Tube Tube Tube Tube 1/18
www.st.com 18
TO-220 IPAK
Contents
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ............................ 6
3 4 5 6
Test circuits
.............................................. 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2/18
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
Electrical ratings
1
Electrical ratings
Table 2.
Symbol
Absolute maximum ratings
Value Parameter DPAK/IPAK TO220/IPAK 600 25 10 6.3 40 90 40 --55 to 150 150 2500 10 (1) 6.3(1) 40 (1) 25 Unit TO-220FP V V A A A W V/ns V C C
VDS VGS ID ID IDM (2) PTOT dv/dt (3) VISO Tstg Tj
Drain-source voltage (VGS=0) Gate-source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC = 100C Drain current (pulsed) Total dissipation at TC = 25C Peak diode recovery voltage slope Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1s;TC=25C) Storage temperature Max. operating junction temperature
1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 10 A, di/dt 400 A/s, VDD = 80% V(BR)DSS
Table 3.
Symbol
Thermal data
Value Parameter TO-220 IPAK DPAK IPAK TO-220FP Thermal resistance junction-case max Thermal resistance junction-amb max Thermal resistance junction-pcb max Maximum lead temperature for soldering purposes -300 62.5 -Unit
Rthj-case Rthj-amb Rthj-pcb Tl
1.38 -50 100 --
5 62.5 --
C/W C/W C/W C
Table 4.
Symbol IAS EAS
Avalanche characteristics
Parameter Avalanche current, repetitive or not-repetitive(1) Single pulse avalanche energy (2) Max value 3.5 200 Unit A mJ
1. Pulse width limited by Tj max 2. starting Tj= 25 C, ID=IAS, VDD= 50 V
3/18
Electrical characteristics
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 5.
Symbol V(BR)DSS dv/dt(1)
On/off states
Parameter Drain-source breakdown voltage Drain-source voltage slope Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 1 mA, VGS= 0 VDD = 480 V,ID = 10 A, VGS = 10 V VDS = max rating, VDS = max rating,@125 C VGS = 20 V VDS= VGS, ID = 250 A VGS= 10 V, ID= 5 A 3 4 0.37 Min. 600 45 1 100 100 5 0.45 Typ. Max. Unit V V/ns A A nA V
IDSS IGSS VGS(th) RDS(on)
1. Value measured at turn off under inductive load
Table 6.
Symbol gfs(1) Ciss Coss Crss Coss eq.(2)
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Gate input resistance Test conditions VDS =15 V, ID= 5 A VDS = 50 V, f =1 MHz, VGS = 0 Min. Typ. 7.5 850 44 5 130 Max. Unit S pF pF pF pF
VGS = 0, VDS = 0V to 480 V f=1 MHz Gate DC Bias=0 Test signal level=20 mV open drain VDD = 480 V, ID = 10 A VGS = 10 V (see Figure 19)
Rg
3.7
nC nC nC
Qg Qgs Qgd
1.
Total gate charge Gate-source charge Gate-drain charge
30 4 16
Pulsed: pulse duration = 300s, duty cycle 1.5%
2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS
4/18
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
Electrical characteristics
Table 7.
Symbol td(on) tr td(off) tf
Switching times
Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD = 300 V, ID = 5 A, RG = 4.7 , VGS = 10 V (see Figure 18) Min Typ 16 7 50 9 Max Unit ns ns ns ns
Table 8.
Symbol ISD ISDM (1) VSD(2) trr Qrr IRRM trr Qrr IRRM
2.
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 10 A, VGS=0 ISD =10 A, di/dt =100 A/s, VDD = 100 V (see Figure 20) VDD = 100 V di/dt =100 A/s, ISD = 10 A Tj = 150 C (see Figure 20) 130 0.69 11 200 1.2 12 Test conditions Min Typ Max 10 40 1.3 Unit A A V ns C A ns C A
1. Pulse width limited by safe operating area Pulsed: pulse duration = 300s, duty cycle 1.5%
5/18
Electrical characteristics
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
2.1
Figure 2.
Electrical characteristics (curves)
Safe operating area for TO-220 / IPAK Figure 3. Thermal impedance for TO-220 / IPAK
Figure 4.
Safe operating area for TO-220FP
Figure 5.
Thermal impedance for TO-220FP
Figure 6.
Safe operating area for DPAK / IPAK Figure 7.
Thermal impedance for DPAK / IPAK
6/18
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND Figure 8. Output characteristics Figure 9.
Electrical characteristics
Transfer characteristics
Figure 10. Transconductance
Figure 11. Static drain-source on resistance
Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations
7/18
Electrical characteristics
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND Figure 15. Normalized on resistance vs temperature
Figure 14. Normalized gate threshold voltage vs temperature
Figure 16. Source-drain diode forward characteristics
Figure 17. Normalized BVDSS vs temperature
8/18
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
Test circuits
3
Test circuits
Figure 19. Gate charge test circuit
Figure 18. Switching times test circuit for resistive load
Figure 20. Test circuit for inductive load Figure 21. Unclamped Inductive load test switching and diode recovery times circuit
Figure 22. Unclamped inductive waveform
Figure 23. Switching time waveform
9/18
Package mechanical data
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
10/18
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
Package mechanical data
TO-220 mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6
inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116
11/18
Package mechanical data
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
TO-220FP mechanical data
Dim. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia 28.6 9.80 2.9 15.90 9 3 mm. Min. 4.40 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.40 10 16 30.6 10.60 3.6 16.40 9.30 3.2 1.126 0.385 0.114 0.626 0.354 0.118 Typ Max. 4.60 2.7 2.75 0.70 1.00 1.50 1.50 5.20 2.70 10.40 Min. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch Typ. Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
A
B
L3 L6 L7
Dia
F1
D
F
G1 H
F2
L2 L5
E
123
L4
7012510-I
12/18
G
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
Package mechanical data
IPAK (TO-262) mechanical data
mm Dim Min A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 Typ Max 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 Min 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050
inch Typ Max 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055
13/18
Package mechanical data
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
TO-252 (DPAK) mechanical data
DIM. A A1 A2 b b4 c c2 D D1 E E1 e e1 H L L1 L2 L4 R V2 0o 0.60 0.20 8o 4.40 9.35 1 2.80 0.80 1 6.40 4.70 2.28 4.60 10.10 mm. min. 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 5.10 6.60 typ max. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20
0068772_G
14/18
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
Package mechanical data
TO-251 (IPAK) mechanical data
mm. DIM. A A1 b b2 b4 c c2 D E e e1 H L (L1) L2 V1 9.00 0.80 0.80 10 o 4.40 16.10 9.40 1.20 5.20 0.45 0.48 6.00 6.40 2.28 4.60 min. 2.20 0.90 0.64 typ max. 2.40 1.10 0.90 0.95 5.40 0.60 0.60 6.20 6.60
0068771_H
15/18
Packaging mechanical data
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
5
Packaging mechanical data
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 16.4 50 22.4 18.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0.795 0.645 0.724 1.968 0.881 BULK QTY 2500 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R
W
BASE QTY 2500
mm MIN. 6.8 10.4 1.5 1.5 1.65 7.4 2.55 3.9 7.9 1.9 40
15.7 16.3
inch MIN. MAX. 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0.059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1.574
0.618 0.641
MAX. 10.6 12.1 1.6 1.85 7.6 2.75 4.1 8.1 2.1
16/18
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
Revision history
6
Revision history
Table 9.
Date 23-Apr-2008
Document revision history
Revision 1 First release Changes
17/18
STP11NM60ND - STF/I11NM60ND - STU11NM60ND - STD11NM60ND
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
18/18

▲Up To Search▲

Price & Availability of STD11NM60ND

	To Download STD11NM60ND Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .